Enhanced coating efficiency due to easily charged particles produced from epoxy resin
Prone to over-baking or yellowing if curing temperature is too high or curing time too long.
1. Pipeline industry: Anti-corrosion pipeline, Oil pipeline, sewage pipe, vessel water pipe, gas pipe and valves etc.
2. Metal furniture: Steel furniture, documents cabinets etc.
3. Kitchen utensils: Gas cylinder, gas cooker, kitchen ventilator etc.
4. Construction industry: Door lock, rebar and steel moulding plate
5. Electrical industry: Electronic spare parts, winding coil, and insulation coating of the rotator etc.
6. Instrument industry: Casing of apparatus and meters
Specific gravity: 1.1~1.8g/cm3 (varied with different color and gloss)
Particle size: Average 10~38um, proportion 10~84um > 90%, it can be adjusted if special requirement is put forward to us in advance.
Standard type: 180° C/15 minutes
Or 160° C/20 minutes, 200° C/10 minutes if customer require
Storage and shippment
The product must be stored in ventilated, dry and clean room with temperature below 25° C, Keep it away from fire, heat, and direct sunlight. Outdoor stacking is prohibited. Avoid rains and exposure to sunshine during shipment. The period of validity is 6 month under above condition. Expired products can not be used unless re-testing result meets the utilization standards.
Health and safety
There are no hazardous ingredients contained. Wearing anti-dust mask and goggles to avoid inhalation of dust. Try best to avoid longtime contact with powder. The coating adhesive to the skin can be washed with soap.
2. Film performance may slightly decrease with gloss decrease.